Flashings and trims are available pre or post-coated metals to meet individual project requirements. They are manufactured in a range of materials and finishes including aluminium, stainless steel, Colorcoat HPS200 Ultra^® and Prisma^® from Corus, Plastisol and PVDF. Flashings can also be made from customer free-issue materials, subject to production capabilities.

To avoid aesthetic problems as the building ages, we recommend that flashings should be made from the same material as the profiled sheets, due to the superior colour and gloss retention achieved using Corus Colorcoat HPS200 Ultra^®.

Sizes, girths and flat areas vary according to materials used.

Please click here to contact CA Building Products commercial team for availability information, alternatively call us on 01388 834242.

Internal and external profiled and insulated panel mitred corners are manufactured to suit the specific requirements of all projects, with innovative production methods ensuring crisp, clean, finishing touches.

Louvres are manufactured to suit individual project needs, from a comprehensive range of materials. They are available in a choice of shapes including square, circular and triangular. The "continuous blade" and "continuous bank" options allow specifiers to use several louvres together to form an apparently seamless continuous run.

CA Building Product's Louvres are front face fixed as standard but can also be manufactured as secret fix or extruded clip system. Blades can be fixed or adjustable and are handle or pulley operated.

Louvres can be supplied in a range of materials and finishes including stainless steel, aluminium, Corus Colorcoat HPS200 Ultra^® or Prisma^®, Plastisol and PVDF.

Free area calculations - taking into account both bird mesh or insect mesh - are available on request by contacting the CA Building Products commercial team here or calling us on 01388 834242.

The Raby Coping system is a complete range of roofing and cladding components that has been developed by CA Building Products to offer innovative engineering solutions.

Produced from carefully selected materials that have been rigorously tested and proven by our special products design team, this system ensures that the building’s designer and specifer’s original vision of smooth, uninterrupted detail can become a reality.

An ingenious secret-fix structural bracket removes the need for visible fastener heads associated with many capping systems, while at the same time allowing correct alignment to accommodate substrate tolerances during installation.

Quick and easy to install, the Raby Coping system does not rely on mastic for weatherproofing and can be installed from within the roofline of the building without the need for specialist safety measures or planning.

A full range of accessories complement the Raby Coping system, allowing complete design freedom.

CA secret-fix Raby Coping System includes:

• 90º T section
• Internal corner
• Standard capping
• Curve cap
• Upstand
• Corner bracket
• Standard bracket

Available with both profiled and flat bases, CA Building Products’ access hatches are manufactured to meet all design requirements for flat, pitched, cladding profile and secret-fix roofs.

Manufactured predominantly from powder coated aluminium, they are lockable from the inside and the lid and sides are fully insulated to maintain overall roof thermal efficiency.

Gas struts to support the lid during opening and closing ensure smooth operation.

Standard sizes 800mm x 800mm and 900mm x 900mm.

Access hatches can be produced for bespoke applications.

Bespoke sizes are available on request.

Please click here to contact CA Building Products sales team, alternatively call us on 01388 834242 for further information.

Providing an aesthetic skin for primary steelwork, CA Building Products’ column casings can add a distinctive feature to any style of building.

Column casings can be manufactured from stainless steel, aluminium or a choice of bespoke materials.

Manufactured from mill finish aluminium, galvanised steel and stainless steel, soakers are available in a bespoke range of shapes and sizes and can be post coated to match a broad range of colours.

Soakers are supplied fully welded. Flat or profiled bases are available to co-ordinate with the roof sheet, regardless of system.

Often an after-thought, rainwater pipes can provide a striking architectural feature as well as a fundamental function forming part of the rainwater management system.

Square or round rainwater pipes are available in a range of colours and finishes, manufactured in standard lengths up to 3 metres or bespoke to suit individual applications.

Round pipes are generally manufactured from aluminium, stainless or galvanised steel and can be post-coated in a range of finishes including polyester powder and Syntha Pulvin^® to standard colours.

Square pipes are available in Colorcoat HPS200^® Ultra and Prisma^® from Corus, as well as plastisol and extruded aluminium.

A range of accessories are available including collars, rodding eyes, swan necks, gully adaptors and pipe clips, all manufactured individually to meet client requirements.

"Anti-Climb" and chain pipes are available on request.