The Modern Curved Roof and it’s Impact on Sustainability
Stuart Brown is Project Development Manager at CA Group Limited. At Buildingtalk Blog Stuart discusses the growth in popularity of the curved roof and why it is the logical choice.
“Modern roofing design has enabled roofing manufacturers that supply the complete system to innovate, delivering standard systems with aesthetically pleasing finishes, such as curves, at no extra cost, allowing architects the freedom to be more adventurous when designing the roof.
The drive towards CO2 reduction has also led architects away from the standard pitched portal roof, towards options which make the building more environmentally friendly – simply by cost effective design.
The curved roof is a prime example. The flow of the building, created by the use of the curved roof, gives a modern appearance far removed from the boxy shape common for buildings of this type in the 80s and 90s.
But as well as looking good, it also provides a practical solution to the problem of wasted or ‘dead’ space within a building. Excess space, results in unnecessary heating or chilling, depending on the building’s use. By introducing the curve, the apex of the roof is reduced and with it the amount of wasted space, and associated operational costs. When you consider that today’s mega sheds, such as the M&S distribution Centre at Bradford, can be as big as 13 or more Wembley sized football pitches – that’s a lot of wasted space.
The curved roof option has also proven popular with developers, as the reduced height makes it easier to adhere to any height restrictions in place, facilitating planning approval, or reducing the need to dig down into the ground.
In addition to the shape of the roof itself contributing to the reduction in CO2 emissions, savings can be further boosted by the introduction of in-plane rooflights. These can be easily installed across the apex of the roof to maximise the distribution of natural daylight coming into the building and minimise shadows.
Orientation of the roof curve in relation to racking layouts is another area which can be considered, by changing the direction of the curve, distribution of natural light into racked areas can be maximised, improving visibility.
Designing and installing a curved roof which is robust enough to meet the requirements of a modern building takes a thorough understanding of the system’s capabilities. Always ensure the project is undertaken by specialist installers, who will have received the necessary training to mitigate any risks associated with poor workmanship, and that the work is covered by meaningful guarantees so, should anything go wrong, it can be put right without any further cost to the building owner.
For many years, architects avoided specifying a curved roof design, due to its dependence on a standing seam type system, which had a significant cost implication.
Today’s modern curve uses a built up cladding system, delivered at no extra cost to the pitched roof design, a factor which has undoubtedly had a part to play in the curve’s resurgence in recent years”